SCV Lever-Float Position

Push desired lever or levers all the way forward and in to lock in float position. Lever will remain in this position and SCV will remain in float position until lever is returned to neutral position. Cylinder is free to extend or retract, letting implement follow ground. Float symbol on SCV TouchSet monitor will be displayed when lever is in float position.

NOTE: Time setting is ignored in Float position.

If lever is in float position at engine start up, float function will operate if lever was moved to float position at least 10 seconds before engine was shut off and had not moved out of float position. If lever was not operated in this manner, float function will be disabled until lever is cycled to neutral.

Cycle cylinder fully in both directions after being used in the float position to ensure cylinder is filled with oil.

OURX984,0000089 -19-17OCT02-1/1