Adjusting Wide Swing Drawbar-If Equipped

IMPORTANT: When installing stop blocks (A) the closed portion of the block should be toward the front of the tractor.

CAUTION: Avoid personal injury. Lock wide swing drawbar in center position for transport and PTO operation using stop blocks (A).

NOTE: See implement manual for drawbar positioning.

Remove retaining rings (D), locking pins (B), and stop blocks (A). Move drawbar to desired position. Install stop blocks, locking pins, and rings.

Stop blocks can be stored on brackets (C) when drawbar is used in full-swing position.

A-Stop Block
B-Locking Pins
C-Storage Brackets
D-Retaining Rings

OURX984,0000090 -19-17OCT02-1/1