Towing Tractor-18-Speed Powershift Transmission

IMPORTANT: Avoid damaging transmission/axle and hydraulic system. Never attempt to start tractor by towing.

If possible, run engine at 1250 rpm to provide lubrication, steering and brakes. Have an operator steer and brake tractor.

Do Not use tie down loops (A) to tow tractor

If the tractor cannot be started and the park brake cannot be released, call your John Deere dealer for service. Special tools are required to release the park brake.

NOTE: Use a tow bar or long chain of adequate size and strong enough to handle the load. Inspect chain for flaws. Always attach vehicles drawbar to drawbar whether pulling forward or rearward. Clear area of people and other hazards before moving.

Shift the gearshift lever to NEUTRAL position (B).

Steer and brake the tractor while being towed.

A-Tie Down Loops
B-Neutral Position

OURX984,00000A9 -19-17OCT02-1/1