Checking Engine Oil Level

Remove dipstick (A) and check oil level with tractor on level ground before starting tractor. Oil level should be between the "ADD" and the top of the cross-hatch area on dipstick.

NOTE: Cross-hatch area is considered FULL.

Remove fill cap (B) if oil is required. See DIESEL ENGINE OIL, in the Fuels, Lubricants and Coolant Section.

Do not operate engine with oil level below the "ADD" mark on dipstick.

A-Dipstick
B-Fill Cap

OURX984,00000BC -19-17OCT02-1/1