Checking Hydraulic Oil Level

Check tractor and implement for leaks before startup. Check hydraulic oil level with tractor on level ground before starting engine. If oil level is not between marks on sight gauge (A) , DO NOT start engine.

NOTE: An exception is implements with large hydraulic cylinders that can remove large volumes of oil from the tractor's hydraulic system. Oil level should be near the bottom mark of sight gauge with implement positioned to contain the maximum amount of oil.

If oil level is low, add HY-GARD Hydraulic Oil.

NOTE: Oil level in reservoir will rise as temperature rises.

Oil level in the reservoir will fluctuate depending upon the volume of oil exchanged with an attached implement.

Oil level switch, located in the reservoir below the sight gauge, will sense if oil level drops below switch level and STOP engine light will come on.

A-Sight Gauge

OURX984,00000C3 -19-17OCT02-1/1