Cleaning and Inspecting Hydraulic Reservoir Screen
SERVICE INTERVAL - 750 Hours *
* Intervals can vary according to operating conditions
CAUTION:
Reduce compressed air to less than 210 kPa (30 psi) (2 bar) when using for cleaning purposes. Clear area of bystanders, guard against flying chips, and wear personal protective equipment including eye protection.
Remove hydraulic reservoir cap and inspect screen (A). Clean screen in solvent and blow dry.
CAUTION:
Reduce compressed air to less than 210 kPa (30 psi) (2 bar) when using for cleaning purposes. Clear area of bystanders, guard against flying chips, and wear personal protective equipment including eye protection.
