Operating Radio with Compact Disc Player (If Equipped)
NOTE:
Press Power with ignition switched off. Radio will play up to one hour, then shut off automatically.
Press BAND to select FM1, FM2, AM, SAT or WX (Weather).
Press TUNE (A) once to tune to the next higher station. Press SEEK (B) once to tune to the next lower station.
Press and hold both TUNE (A) and BAND to switch between manual tune mode and "seek" mode.
Holding SEEK longer than half a second begins the "seek" function. When a station with a strong enough signal is found, "seek" function will stop at that station.
Press SCAN (J) to scan all stations. When a strong enough signal is found, the station will play for 5 seconds then continue to scan until SCAN is pressed again.
Storing Preset Stations:
1.
Select the desired band (FM1, FM2, AM, SAT or WX)
2.
Tune to desired station.
3.
Press and hold one of the six preset buttons to store the selected station.
4.
Repeat procedure for remaining preset buttons.
Press DISPL/TM SET button to switch between displays. When the receiver is in AM, FM1, FM2, SAT or WX, the display will switch between frequency and time of day.
Adjust volume, bass, treble, fade, and balance by pressing and releasing ON/AUDIO knob repeatedly until desired function appears on display. Rotate ON/AUDIO knob for adjustment.
|
A-Tune
B-Seek
C-Preset Station/RPT-Repeat
D-Preset Station/RDM-Random
E-Preset Station/REV-Fast Reverse
F-Preset Station/PAUSE-Pause
G-Preset Station/FF-Fast Forward
H-Eject CD
I-Slot
J-Scan/Dim
|