Using ClimaTrak® (ATC) -If Equipped (Serial No. -902000)

Set switch to automatic position (A).

Select desired reference temperature by turning control knob (B).

Set fan speed control (C) to AUTO position.

NOTE: Fan speed adjusts automatically in AUTO position. Turning speed control (C) to manual mode settings provides continuous fan speed.

Fan continues to operate when switch is in position (E).

Select DEFOG setting (D) to reduce condensation inside the cab.

NOTE: If fault indicator (F) flashes during operation, see your John Deere Dealer.

RXA0053362


A-ClimaTrak Control Position
B-Temperature Control
C-Fan Speed Control
D-DEFOG Position
E-ClimaTrak OFF Position
F-System Fault Indicator

ClimaTrak is a trademark of Deere & Company

RW24911,0000003 -19-04OCT04-1/1