Using SCV TouchSet Controls and Monitor

CAUTION: Push transport lock touch switch (F) on SCV TouchSet monitor before attaching or detaching implements to prevent implement movement and possible personal injury.

Hydraulic setup and adjustment panel on side console provides operational display of SCV function and a means to set flow rate and detent time operation for each SCV.

At start up, display will show all SCV numbers and symbols for 2 seconds. After start up, SCV monitor displays selected time for each SCV.

Select SCV number (I-V). SCV monitor will enter adjustment mode. Bar graph display will show rabbit, turtle and clock symbols (H) for selected SCV. Digital display shows flow setting and detent time for selected SCV (D).

In adjustment mode, selected SCV settings may be changed. Adjustment mode remains activated for 20 seconds after which time display returns to normal operation.

In normal mode, SCV monitor will only display current detent time settings for each SCV. Flow rate will be displayed as a bar graph.

A-TouchSet™ Controls and Monitor
B-SCV Selector Touch Switch
C-Cylinder Extend Limit Touch Switch¹
D-Display-SCV Selected and Flow Rate
E-Cylinder Retract Limit Touch Switch¹
F-Transport Lock Touch Switch
G-Detent Time Adjustment
H-Display-Flow Rate and Time Detents
I-Flow Rate Adjustment

TouchSet is a trademark of Deere & Company

¹Cylinder Extend and Retract Limit Touch Switches used with TouchSet Depth Control only

RW24911,0000068 -19-01MAY01-1/1