GREENSTAR™ System Connections

NOTE: Requires notching corner post trim for harness routing to mobile processor.

Tractors after (Serial Number 902,000-) connector (C) was removed and wiring integrated into cab harness.

Connectors (A), (B), and (C) are behind the corner post cover.

Connector (D) is under the cab roof below the front wiper motor.

Connector (E) is located at the rear of the tractor.

See your John Deere Dealer for installation assistance.

A-Display Monitor Connector
B-Mobile Processor Connector
C-Corner Post Display Connector
D-GPS Receiver Connector
E-Implement Connector

GREENSTAR is a trademark of Deere & Company

RW24911,0000183 -19-15MAY06-1/1