|
Drawbar Implements:
Swinging drawbar is not recommended unless an operation requires implement to be left in the ground during turns. Some implements may have drawbar angling to assist in turning.
Semi-Integral Implements:
Partial hitch sway may be necessary to make minor steering corrections. For precise operation full sway is not recommended.
Integral Implements:
Partial hitch sway is required to make minor steering corrections. For precise operation full sway is not recommended.
Implement must use gauge wheels and tractor lift arms should be allowed to float.
|
| NON-APPROVED USES |
| |
| Spray Tanks - Mounted other than onto the track frame |
| Scrapers |
| Tiling Plows - Mounted to tractor frame or hitch |
| Fully Mounted Hitch Implements - Center of gravity greater than 609 mm (24 in.) beyond hitch points |
| Fully Mounted Hitch Implements - Total weight exceeds: 6350 kg (14,000 lb) - Category 4 - Without implement-mounted lift assist |
| Fully Mounted Hitch Implements - Total weight exceeds: 6123 kg (13,500 lb) - Category 3 - Without implement-mounted lift assist |
| 9420T, 9520T and 9620T with Category 3 Hitch - Deep ripping/plowing applications using full horsepower (Use Category 4 hitch) |
| Extreme Draft Loads - Requiring two tractors hooked in tandem |
| Tow Hooks - Adding tow hooks is not an option |
| Front Blades/Dozer |
| Front Hitch |
|