CAUTION: Do not add hydraulic oil to reservoir with engine running. Injury from unexpected hitch or cylinder movement may occur.

IMPORTANT: Power loss and excess heat generation can result if additional large volume of oil is not removed after using the implement. Removing too much oil can result in malfunction when raising the hitch or using the "extend" function of SCVs

Cycle all implement cylinders after starting tractor.

Check the hydraulic oil level. (See CHECKING HYDRAULIC OIL LEVEL, in the Lubrication Section.)

Add oil if required.

Lower the implement and retract the cylinders to return the oil to reservoir.

Recheck oil level when implement is removed.

Drain excess oil if necessary from reservoir.

RW24911,000029D -19-23SEP04-1/1