GREENSTAR™ Plug & Play Connections-Late Version-If Equipped

Components included in plug & play option include:

• 1-Vehicle side quick-coupler for StarFire receiver (A) and GreenStar harness connector (B) (Bracket is dealer installed).
• 2-GreenStar display mobile processor mounting bracket (C).
• 3-Bulk Head Connector for GSD4, GSD2100 and GSD2600 Displays (D).
• 4-Ground Speed or Radar Speed Connector (E).
• 5-Implement connector (F).
• 6-Tractor specific components for GreenStar AutoTrac.

Install bracket (C) for GreenStar Display.

NOTE: Bracket (C) can be adjusted to provide desired position for GreenStar Display Monitor.

Install harness from display to bulk head connector (D).

NOTE: See your John Deere dealer for wiring harnesses needed to connect to GSD4, GSD2100 and DSD2600 displays.

Connect StarFire connector (B) to StarFire receiver (A).

NOTE: See your John Deere dealer for wiring harnesses needed to connect to StarFire receiver.

Requires additional components for fully functional GreenStar AutoTrac steering system.

See your John Deere Dealer for installation assistance.

A-StarFire Receiver
B-GreenStar Connector
C-GreenStar Display Mobile Processor Mounting Bracket
D-Bulk Head Connector for GSD4, GSD2100 and GSD2600 Displays
E-Ground Speed or Radar Speed Connector
F-Implement Connector

GREENSTAR is a trademark of Deere & Company

RW29387,0000032 -19-19OCT05-1/1