Rear Fender HID Bulb Replacement-If Equipped

Remove cap screws (A) and bezel (B).

Carefully pull HID light assembly (C) out of cover far enough to unplug wiring harness (F).

NOTE: Do not remove HID lamp (D) from HID light assembly.

Press in on HID light assembly and remove retainer (E) with a screw driver.

Connect wiring harness plug to new HID light assembly.

Install HID light assembly in cover and install bezel and cap screws.

RXA0085596


A-Cap Screw
B-Bezel
C-Reflector
D-Lamp
E-Retainer
F-Wiring Harness

RW29387,0000463 -19-09MAR06-1/1