Heavy-Duty Hammer Strap-If Equipped

NOTE: Heavy-duty hammer strap is recommended if equipped with heavy-duty drawbar. Standard hammer strap is not compatible with and cannot be used with heavy-duty drawbar kits.

IMPORTANT: Top clamp plate must be used when hammer strap is not used.

IMPORTANT: Cap screws may loosen during initial torquing sequence. After completing first sequence, repeat steps 1-6 to ensure correct specification.

Tighten cap screws to specification in crisscross sequence:

1. Torque #1
2. Torque #4
3. Torque #2
4. Torque #3
5. Torque #6
6. Torque #5

Repeat above sequence to obtain proper torque.

RXA0072567
RXA0073937

Heavy-Duty Hammer Strap
Item Measurement Specification
Hammerstrap Assembly

Cap Screws 1, 2, 3 and 4

Torque 610 N·m (450 lb-ft)

Cap Screws 5 and 6

Torque 750 N·m (550 lb-ft)

RW29387,00006C9 -19-16DEC04-1/1