Drive Train Protection-9420T-9520T-9620T

IMPORTANT: 9620T Only: When Engine Air Filter Restriction Warning is activated (CCU 030) the engine performance will be reduced. Service engine air filter immediately.

The drivetrain protection system is gear-sensitive and will not be apparent in most situations. It does not affect load starting and only affects operations in gears with maximum operating speeds below 4.5 mph (7.2 km/h) (18-speed 7F). Full engine horsepower, plus 7 percent power bulge is available in all other gears.

Electronic engine controls provide protection from drive train overloading. Engine horsepower is automatically reduced to protect drive train components when:

  • Operating with extremely heavy ballast and full power lugging below 6.4 km/h (4.0 mph)
  • Using PTO when tractor ground speed is less than 0.8 km/h (0.5 mph)
  • 9620T model only - Using 3-point hitch when hitch is not at upper raise limit.
  • See your John Deere Dealer for more details.

Gear 9420T Power* 9520T Power* 9620T Power*
8 425 hp (317 kW) 450 hp (335 kW) 500 hp (373 kW)
7 425 hp (317 kW) 450 hp (335 kW) 500 hp (373 kW)
6 425 hp (317 kW) 450 hp (335 kW) 475 hp (354 kW)
5 425 hp (317 kW) 425 hp (317 kW) 450 hp (335 kW)
4 400 hp (298 kW) 400 hp (298 kW) 425 hp (317 kW)
3 375 hp (268 kW) 375 hp (268 kW) 400 hp (298 kW)
2 375 hp (268 kW) 375 hp (268 kW) 400 hp (298 kW)
1 375 hp (268 kW) 375 hp (268 kW) 400 hp (298 kW)
* Power Management - 9420T, 9520T and 9620T with Powershift Transmission

 

RW29387,00006CD -19-04OCT04-1/1