|
Remote cylinder will not lift load
|
Flow check
|
Cycle SCV levers
|
|
|
Excessive load
|
Reduce load
|
|
|
Hoses not completely installed
|
Attach hoses correctly
|
|
|
Incorrect remote cylinder size
|
Use correct size cylinder
|
|
|
SCV transport lock engaged
|
Release SCV transport lock
|
|
Remote cylinder rate of travel too fast or too slow
|
Incorrect flow rate
|
Adjust flow rate
|
|
Direction of remote cylinder travel is reversed
|
Incorrect hose connections
|
Reverse hose connections
|
|
Hoses will not couple
|
Incorrect hose male connectors
|
Replace connectors with ISO Standard connectors
|
|
Detent does not hold or releases too soon
|
Detent time set incorrectly
|
Set time correctly
|
|
|
SCV lever is not being released to neutral
|
Release SCV lever from detent to neutral in less than 0.8 seconds
|
|
SCV lever does not release
|
SCV float is being "commanded"
|
Do not push lever down in forward position
|
|
|
Lever mechanism failed
|
See your John Deere Dealer
|
|
Implement does not operate or does not operate correctly
|
Incorrect hose connections
|
See your John Deere Dealer
|