SCV Lever-Extend Detent Position

Pull lever rearward to "click" detent position and release. Lever will return to neutral position, but flow will continue at rate set on TouchSet panel. See Adjusting SCV Flow Rate and Adjusting Detent Time in this section.

Flow timing begins when lever is moved into detent. SCV flow time should be adjusted so cylinder will be fully extended when time has elapsed.

Detent can be cancelled by moving SCV lever forward or rearward from neutral after lever has returned to neutral or by holding lever in extend position for more than 0.8 second after lever is released from detent.

NOTE: If lever returns from detent to stow in less than 8 seconds, detent cancels.

OURX935,00000D8 -19-15JUN05-1/1