|
PST Transmission Vent Between Engine and Transmission Yoke Leaks Oil
|
Clogged transmission filter screen
|
Clean screen
|
|
Transmission Warning Displays
|
Diagnostic trouble code has been stored
|
See PTP codes in the Diagnostic Trouble Codes section
|
|
PST Transmission Skips Gears While Shifting
|
No problem
|
See Shifting the Transmission in Operating the Tractor section
|
|
Transmission Shifts Slowly and Tractor Steers Hard
|
Cold oil
|
See Transmission/Hydraulic System Warm-Up in Operating the Tractor section
|
|
Transmission Slips, Shifts Rough or Abruptly (Jerky)
After Oil Change
|
Recalibrate transmission (PST only)
|
See Changing Transmission/Hydraulic Oil in the Lubrication section
|
|
|
|
Have dealer recalibrate
|
|
|
|
See your John Deere dealer
|
|
Transmission Starts Out Too Fast/Slow
|
No problem
|
Start-up gear can be changed through the CommandCenter settings. See Shifting the PST Transmission in Operating the Tractor section.
If problem persists, see your John Deere dealer
|