|
Remote Cylinder Will Not Lift Load
|
Flow check
|
Cycle SCV levers
|
|
|
Excessive load
|
Reduce load
|
|
|
Hoses not completely installed
|
Attach hoses correctly
|
|
|
Incorrect remote cylinder size
|
Use correct size cylinder
|
|
|
SCV transport lock engaged
|
Release SCV transport lock
|
|
|
Incorrect or damaged hose tips
|
Replace hose tips
|
|
Remote Cylinder Rate of Travel Too Fast or Too Slow
|
Incorrect flow rate
|
Adjust flow rate
|
|
Direction of Remote Cylinder Travel Is Reversed
|
Incorrect hose connections
|
Reverse hose connections
|
|
Hoses Will Not Couple
|
Incorrect hose male connectors
|
Replace connectors with ISO standard connectors
|
|
Detent Does Not Hold or Releases Too Soon
|
Detent time set incorrectly
|
Set time correctly
|
|
|
SCV lever is not being released to neutral
|
Release SCV lever from detent to neutral in less than 0.8 second
|
|
SCV Lever Does Not Release
|
SCV float is being "commanded"
|
Do not push lever down in forward position
|
|
|
Lever mechanism failed
|
See your John Deere dealer
|
|
Implement Does Not Operate or Does Not Operate Correctly
|
Incorrect hose connections
|
See implement operator's manual
|
|
|
|
See your John Deere dealer
|