Replacing Front Belt-Line, Cab Roof Rear and Side or Rear Fender Flood Light Bulb

1. Rotate flood light as necessary, to access backside of light.

2. Belt-line and rear fender flood lights; Remove rubber cover.

3. Disconnect wiring harness plug (A).

4. Rotate bulb (B) counterclockwise approximately 1/4 turn and remove.

5. Install bulb in reverse order of removal.

RXA0068500

Rear Cab Roof Flood Light Shown


A-Wiring Harness Plug
B-Bulb

OURX935,000057B -19-02JAN08-1/1