Setting Rear PTO Engagement RatePress vehicle Settings Switch (A) to view menu items on Display (D). Rotate Command Dial (B) to highlight desired menu item and press Select Switch. Menu Items on Display (D)
Auto setting is used for most implements, and is the factory setting in the CommandCenter. This setting provides software logic to determine the engagement rate for the PTO clutch, based on PTO speed sensor feedback. If the PTO does not turn fast enough during initial PTO clutch engagement, the engagement rate is automatically increased to avoid clutch slip and PTO shutdown. Low Rate can be used where gradual PTO startup is required, or if Auto engagement is too aggressive or inconsistent. Typically used for "lighter" loads or implements. High Rate can be used for applications where PTO clutch engagement needs to be unusually aggressive. Typically used for "heavier" loads or implements. |
|
OURX935,0000630 -19-04AUG06-1/1 |