250 Hour Service Records

• Change engine oil and filter NOTE: The initial break-in service interval of a new or rebuilt wet sleeve engine with Break-In Plus must go at least 100 hours to assure the surface mating of the rings and liners has had an opportunity to occur. The 100 hour minimum applies to all new or rebuilt engines. The maximum service interval is the same as the service interval recommendations listed in Engine Oil and Filter Service Intervals for your engine. To confirm which engine your tractor is equipped with, see Section 145 Record Engine Serial Number in this Operator's Manual.

  For subsequent oil changes, see Engine Oil and Filter Service Intervals for your engine located in section 90 of this Operator's Manual.

  
  

  For subsequent oil changes, see Engine Oil and Filter Service Intervals for your engine located in section 90 of this Operator's Manual.

• Check NEUTRAL start system
• Check transmission PARK position
• Check wheel weight bolts and wheel bolts
• Lubricate MFWD or Independent Link Suspension front axle components and U-joints
• Lubricate Independent Link Suspension external fittings
• Check MFWD differential case oil level
• Check manual brakes
• Checking Piton, Ball and Tow Hook Hitches
• Lubricate front hitch components
• Drain fuel tank and sump
• Checking Dual Beam Radar
• Check MFWD and/or Independent Link Suspension wheel hub oil level

Hours					Hours
Date					Date
Hours					Hours
Date					Date
Hours					Hours
Date					Date
Hours					Hours
Date					Date