Stopping the Engine

IMPORTANT: Before stopping engine that has been operating at working load, idle engine at least 1 or 2 minutes at 1000—1200 rpm to cool hot engine parts.

1. Stop tractor and pull throttle back to slow idle position.

2. Depress clutch and brake pedals.

3. Put transmission in PARK position.

4. Lower all equipment to the ground.

5. Make sure SCV levers are in NEUTRAL position.

6. Make sure PTO switch is disengaged.

7. CAUTION: Remove ignition switch key to help prevent accidents.

   Turn ignition key to OFF position and remove key.