Two-Wheel Drive Front Axle Toe-In Adjustment

RXA0056635-UN-31AUG01

RXA0056636-UN-31AUG01

A - Tie Rod Bolts

B - Clamps

1. Remove bolts (A) from tie rod tube and loosen clamp (B).

2. Rotate tube to lengthen or shorten tie rod. Adjust toe-in to 3—7 mm (1/8—1/4 in.).

3. Replace bolts (A) and tighten nuts.

   Item	Measurement	Specification
   Tie Rod Retaining Nuts
   Retaining Nut	Torque	60 N˙m (45 lb-ft)

4. Tighten clamps (B).

   Item	Measurement	Specification
   Tie Rod Clamps
   Clamp	Torque	68 N˙m (50 lb-ft)