Using Implement Requiring Large Volumes of Oil

NOTE: Do not add oil to reservoir with engine running.

If additional oil capacity is needed for large one way cylinders, an optional field installed auxiliary reservoir is available. See your John Deere dealer.

IMPORTANT: Removing too much oil can result in malfunction when raising the hitch or using the ”extend” function of SCVs.

Cycle all implement cylinders after starting tractor.

Check the transmission-hydraulic oil level. (See Checking Transmission-Hydraulic Oil Level in the Lubrication Section.)

Add oil if required.

Lower the implement to return the oil to the reservoir.

Recheck oil level when implement is removed.

Drain excess oil if necessary.