OMAR283034: 9230, 9330, 9430, 9530 and 9630 Tractors, Block File: OU1092A_00001C1_19

Using Diagnostics, Codes and CAN Statistics

A-Settings Switch

B-Command Dial

C-Select Switch

D-Display

Press Setting Switch (A) to view menu items on Display (D). Rotate Command Dial (B) to scroll through menu items. Press Select Switch (C) when desired item is highlighted.

Menu Items on Display (D)

English Translation (if applies) Diagnostics Diagnostics Codes Codes CAN Statistics CAN Statistics

IMPORTANT: Controllers and CAN Statistics are not normally used by the operator. Diagnostic codes and CAN statistics

are used by service technicians to isolate, identify and resolve problems or malfunctions. Do not clear diagnostic codes from memory; this should only be done by a qualified, factory trained John Deere service technician.

Codes: If any codes are stored, "Retrieving. . ." will appear, followed by the last displayed code. Use Command Dial to scroll through codes. If no codes are stored, no codes are displayed. A listing of possible error and solutions codes is provided in back of operator manual.

OU1092A,00001C1 -19-29OCT07-1/1