Field Cruise Control
|
|
Rotate Command Dial (A) to bring Field Cruise Screen (B) to bottom-half display. Press Select Switch (C), rotate Command Dial to raise or lower engine rpm setting as needed, and press Select Switch again. Engine speed can be adjusted from 1100-2150 rpm. Changes to rpm setting take place immediately. Field Cruise utilizes a constant speed governor curve, providing instant response to varying loads. Use of |
Field Cruise will remove availability of power bulge and as such is not recommended for heavy tillage applications.
Use field cruise control when controlled ground speed is desired (spraying, fertilizer spreading, seed drilling, etc.). Limiting engine speed in light load situations may improve fuel economy. |
RW29387,000004F -19-29OCT07-1/1 |