|
Any of the following will cause IMS to shut off (abort):
-
Pressing
ON/OFF
switch while sequence is executing
-
Pressing
LEARN/SAVE
switch during execution
-
Pressing the
opposite sequence
switch during execution
-
Allowing speed to drop to less than 0.5 km/h (0.31 mph) and operator not present in seat
|
-
Shifting transmission to NEUTRAL or PARK position
-
If 60 seconds elapses without operator input during the
LEARN
execution mode
-
If 60 seconds elapses without operator input during the
SEQUENCE
execution mode and no operator detected in seat or pressing the clutch pedal
|