Recommended Ballast-76x50.00B32 and Logger Tires-Singles
|
|
Tractors for scraper (without dolly wheels) application should be ballasted between 65 to 75% Front Weight Split.
The chart below lists the factory recommended ballast and resulting weight split. |
| |
| Cast Weights Required for Ballast Recommendation |
| |
| 1317 kg (2904 lb) - 1 Front weight support/frame and 22 Quik-Tatch weights |
| 4309 kg (9500 lb) - Additional weight could be obtained if needed by adding 75% liquid ballast in front tires |
NOTE: These are good starting weight combinations and may be adjusted up/down depending upon application, conditions, ect. |
| Factory Recommendation for Overall Best Performance |
| |
|
|
|
|
| Model |
Front Ballast Added |
Rear Ballast Added |
Weight Split F/R % |
kg/kW (Lbs/HP) |
| |
|
|
|
|
| 9430 |
1317 kg (2904 lb) |
0 kg (0 lb) |
67% / 33% |
61 (100) |
| 9530 |
1317 kg (2904 lb) |
0 kg (0 lb) |
67% / 33% |
54 (90) |
| 9630 |
1317 kg (2904 lb) |
0 kg (0 lb) |
67% / 33% |
49 (80) |
| Any Model |
Additional 4309 kg (9500 lb) |
0 kg (0 lb) |
73% / 27% |
60 to 74 (98 to 122) |
| |
|
|
OU1092A,00001EA -19-24OCT07-1/1
|
|