1500 MFWD Dual Front Tire, Fender and Steering Stop Settings

Maximum single wheel tread spacing is 2235 mm (88 in.).

Maximum dual outer setting is 3657 mm (144 in.).

Maximum static front axle weight, without liquid ballast or duals, is 10800 kg (23800 lbs).

Some wheel settings may exceed 2794 mm (110 in.) mean tread spacing. These settings are allowed, but at reduced axle loads as shown in the following table.

NOTE: To determine the mean tread spacing, add tread spacing for inner tire (center to center) and tread spacing for outer tire (center to center). Divide by two.

Axle Load Table
Mean Tread Spacing Allowable Static Axle Weight
2794 mm (110 in.) 10800 kg (23800 lbs)
2845 mm (112 in.) 10390 kg (22900 lbs)
2895 mm (114 in.) 10020 kg (22090 lbs)
2946 mm (116 in.) 9670 kg (21320 lbs)

 

NOTE: Listed below are instructions for using the 1500 MFWD Dual Front Tire, Fender and Steering Stop Settings Table.

The first row under heading gives the row spacing in millimeters and inches.

Column one lists the tire size.

The first number in column identifies either an eight or sixteen position rim is used. The first letter indicates which example to follow, either Eight or Sixteen Position Wheel Settings. The next number is the correct steering stop position. The last letter is the fender setting, which is taken from the 1500 MFWD and Independent Link Suspension Fender Settings block in this Operator's Manual.

OURX935,0000445 -19-13AUG08-1/2

  Row Spacing
  508 mm (20 in.) 558.8 mm (22 in.) 762 mm (30 in.)
Tire Size Inner Tire
2032 mm (80 in.)		 Dual Tire
3048 mm (120 in.)		 Inner Tire
2235.2 mm (88 in.)		 Dual Tire
3352.8 mm (132 in.)		 Inner Tire
1524 mm (60 in.)a		 Dual Tire
3048 mm (120 in.)
Mean Tread 2540 mm (100 in.) 2794 mm (110 in.) 2286 mm (90 in.)
380/80R38 16L1F 16D1F * 16P1H * 16I1H * 16A3A 16D3A*
420/85R34 8F0F 8B0F * 8H1H * 8E1H * N/A NA *
480/70R34 8F0F 8B0F * 8H1H * 8E1H * N/A NA *
aTo achieve a 1676 mm (66 In.) row spacing setting, use 1625mm (64 in.) row spacing and order one 25.4 mm (1") spacer set per side through your John Deere dealer.

 

* Tool box must be removed to avoid hitting tires.

  Row Spacing
  812 mm (32 in.) 914.4 mm (36 in.) 1016 mm (40 in.)
Front duals for flotation not for row cultivation.
Tire Size Inner Tire
2032 mm (64 in.)		 Dual Tire
3251.2 mm (128 in.)		 Inner Tire
1828.8 mm (72 in.)		 Dual Tire
3657 mm (144 in.)		 Inner Tire
2032 mm (80 in.)		 Dual Tire
3657 mm (144 in.)
Tire not in row.
Mean Tread 2439 mm (96 in.) 2743 mm (108 in.) 2845 mm (112 in.)
380/80R38 16D2B 16H2B * 16H3D 16P3D * 16L3F * 16P3F *
420/85R34 8B3B 8D3B * 8D3D 8H3D * 8F3F * 8H3F *
480/70R34 8B3B 8D3B * 8D3D 8H3D * 8F3F * 8H3F *

 

* Tool box must be removed to avoid hitting tires.

OURX935,0000445 -19-13AUG08-2/2