|
Aborting IMS Sequence
Any of the following will cause IMS to shut off (abort):
-
Pressing
ON/OFF
switch while sequence is executing
-
Pressing
LEARN/SAVE
switch during execution
-
Pressing the
opposite sequence
switch during execution
-
Shifting transmission to NEUTRAL position
-
If 60 seconds elapses without operator input during
LEARN
or
SEQUENCE
execution mode
|
Clearing IMS Sequence
1.
Press IMS
ON/OFF
switch to ON.
2.
Press
LEARN/SAVE
switch.
3.
Press
SEQUENCE
switch.
4.
Press
LEARN/SAVE
switch again to clear existing sequence.
|