Service Interval Chart-Daily or 10 Hours-100 Hours (Initial)-250 Hours-500 Hours-750 Hours

Item Daily or 10 Hours 100 Hours (Initial) 250 Hours 500 Hours 750 Hours
Checking Engine Oil ·        
Checking Tires ·        
Checking Transmission/Hydraulic Oil Level ·        
Draining Air Brake Tank (If Equipped) ·        
Lubricating Hitch Components ·        
Checking Coolant Level (Coolant Recovery Tank) ·        
Draining Water Separator ·        
Checking Coolant Level (De-aration Tank)   ·      
Changing Engine Oil and Filter *   · ·    
Checking Neutral Start System (PST or IVT Transmissions)     ·    
Checking Transmission PARK Position     ·    
Checking Wheel and Wheel Weight Bolts     ·    
Lubricating 2WD Front Axle And Front Wheel Bearings ***     ·    
Lubricating MFWD Axle And MFWD Axle U-Joints ***     ·    
Lubricating Independent Link Suspension External Fittings *** And Axle U-Joints     ·    
Checking MFWD Differential Case Oil Level     ·    
Cleaning Cab Air Filters **     ·    
Checking Manual Brakes     ·    
Lubricating Front Hitch (If Equipped)     ·    
Draining Fuel Tank Sump     ·    
Checking MFWD or Independent Link Suspension Wheel Hub Oil Level     ·    
Replacing Fuel Filter Elements (Both Fuel Filters) ****       ·  
Cleaning MFWD Axle Vent Filter         ·
Cleaning Fuel Tank Vent Filter **         ·
Checking Air Intake System         ·
Testing Coolant         ·
* INITIAL engine oil and filter change is 100 hours maximum of operation. SCHEDULED interval (250 hours) can be extended to 375 hours if John Deere PLUS-50 oil and John Deere filter are used.
** Interval can vary according to operating conditions
*** Daily or 10 Hours when operating in extremely wet and muddy conditions or where AutoTrac is used.
**** Replace at 500 hours or annually whichever comes first.

 

OURX935,00004FD -19-11SEP08-1/1