Basic Baler Settings for Baling Cornstalks

Use the chart below as a guide for basic adjustments of baler when baling cornstalks:

  • A - Wheel spindle position/pickup width (Baler with 10.0/75 X 15.3 tires)
  • B - Bale density
  • C - Compressor rack installed
  • D - Tractor ground speed
  • E - PTO rated speed (rpm)
  • F - Windrow size
  • G - Starter roll scraper adjustment
  • H - Rubber bars installed on starter roll
  • I - Steel bars installed on starter roll
  • A.F.C: According to Field Conditions
  • A.R: As Required
CC1018314

CROP A  
  1.41m (4ft7in) 1.81m (5ft11in) 2.20m (7ft3in) B C D E F G H I
CORNSTALKS 2 4a 4 MAX NO A.F.C 540 1.2m(4 ft) 0.5mm (0.02in.) MAX NO YES
aPosition 3 is required if baler is equipped with larger tires.

 

AG,OUCC006,516 -19-01SEP00-1/1