Unplugging Baler without Precutter Device (590 Only)

CAUTION: Never unplug baler manually before shutting off tractor.

Stop tractor.

Place gate lock valve in "Lock" position (A).

Raise belt tension arm by means of tractor selective control valve until upper arm just starts to move.

Engage PTO.

IMPORTANT: If belts slip, lower belt tension arm. Prolonged belt slippage may cause baler damage.

If this does not clear the baler, discharge bale and shut off tractor.

Place gate lock valve in "Lock" position (A) and unplug manually.

CC03745,00001C2 -19-08NOV00-1/1