Adjusting Bottom Roll (NR 1) Scraper (Baler with Precutter Device)

Distance (A) between bottom roll (B) and scraper (C) should be 2 mm (0.08 in.) maximum.

Adjust scraper (C) as follows:

Loosen screws (D) then adjust distance (A).

Manually rotate baler to check distance at all bars.

Tighten screws (D).

A-2 mm (0.08 in.) maximum
B-Bottom roll
C-Scraper
D-Mounting screws

CC03745,00001C8 -19-08NOV00-1/1