Reducing Left-Hand Side Number of Twine Coils

If the desired number of twine coils is less important on the left-hand side than on the right-hand side of the bale, the RE-EXTENSION key allows to reduce the number by up to 2 twine coils at the left-hand side of the bale. Proceed as follows:

Key in the desired number of twine coils at the start (right-hand side) or end (left-hand side) wrap position as described in "Adjusting Bale Side Wrap" in this Section.

If value entered is 3 twine coils (A) and that 2 twine coils (B) are desired on the left-hand side, then hold RE-EXTENSION key and reduce re-extension setting to the value -1 (C) using MINUS key.

CC03745,00001CE -19-08NOV00-1/1