Adjusting Bale Shape Senders (Baler with BaleMaster Control Monitor)

Adjust bale shape senders as follows:

Close the gate.

Adjust bale shape roller (A) until a distance (B) of 10 mm (0.4 in.) is obtained as shown on illustration.

Loosen shield (C) attaching screws just enough so that shield can be moved.

With roller (A) in this position, move shield (C) up or down as necessary until 5 arrows are displayed on LCD screen.

Then move shield (C) just enough to display 6 arrows.

Readjust if necessary.


A-Bale shape roller
B-10 mm (0.4 in.)
C-Shield assembly

CC001269
CC006923
CC007252

CC03745,00001D9 -19-08NOV00-1/1