Manual Twine Control

The Manual Twine Control (A) allows the operator to manually control the twine wrapping cycle by using the switch (B) to distribute the twine across the bale.

The Manual Twine Control includes two warning sound alarms:

When the desired bale diameter is achieved. This sound alarm informs the operator that he should stop the tractor forward travel and start to wrap the bale.

When bale has reached the maximum permissible diameter (danger of oversize). Check and determine cause of problem. At that time, operator should stop the tractor forward travel and start to wrap the bale.

Once connected to the baler wiring harness, the Manual Twine Control (A) is ready to operate.

NOTE: The Manual Twine Control includes an electronic limit switch which allows a full twine arm actuator protection from any improper use.

The sound level of the buzzer is adjustable.

CC,570RB001506 -19-15SEP98-1/1