Engaging Bale Push Bar (590 Only)Remove retaining ring (A) from pin (B). Remove pin (B) and washer (C) from gate pin. |
|
CC,570RB001527 -19-15SEP98-1/3 |
|
Detaching Chain From Lockout Hook
Remove tension from chain by rotating the spring assembly (A) to the rear. Remove end chain link from lockout hook (B). Let chain hang free to remove any twists. |
|
CC,570RB001527 -19-15SEP98-2/3 |
|
Attaching Chain to Gate Pin
Attach end chain link (A) to gate pin. Install washer (B), pin and retaining ring (C). Repeat on opposite side. IMPORTANT: Both chains must be attached to gate pins before operating the push bar. Damage can occur to the push bar and/or gate if one chain is left in the lockout position or is unhooked completely. |
|
CC,570RB001527 -19-15SEP98-3/3 |