Securing Bale Push Bar Chain (590 Only)

Attach the end chain link (A) to lockout hook (B). Release spring assembly.

Install washer (C), pin and retaining ring (D) on gate pin.

Repeat on opposite side.

IMPORTANT: Both chains must be attached to lockout hooks to lock out push bar. Damage can occur to the push bar and/or gate if one chain is left attached to the gate pin or is unhooked completely.

NOTE: If operating the baler with push bar locked out, it will be necessary to back up baler before ejecting the bale.

A-Chain link
B-Lockout hook
C-Washer
D-Retaining ring

CC,570RB001529 -19-15SEP98-1/1