Installing Belts

On 570 - 580 Balers:

Slacken belts by raising belt tension arm with tractor selective control valve lever.

When gate is opened, engage safety latch and slowly move tractor selective control valve lever to the float position until top idler roll arm (A) moves down.

On 590 Baler:

Slacken belts by locking the gate in any position and raising the belt tension arm with tractor selective control valve lever.

On All Balers:

Install belts with diamond portion of belt to the outside.

CC,570RB001617 -19-15SEP98-1/1