Positioning Precutter Front Sheet

The precutter front sheet (A) can be set in several operating positions when baling short crops or set in storage position when baling normal crops.

Hold front sheet (A) by hand, then remove spring-locking pin (B).

Let the front sheet (A) fall down.

Store spring-locking pin (B) on strap (C).

Depending on the windrow thickness, attach chain link (D) on chain anchor (E) to obtain the desired space between tip of pickup teeth and front sheet (A).

NOTE: The front sheet is spring loaded to allow floating. This floating can be adjusted by using more or less chain links between spring anchors.

Remove spring-locking pin (B) from strap (C).

Raise front sheet (A) and secure it with spring-locking pin (B) on strap (C).

NOTE: Chain can stay attached on anchor to recover the same front sheet (A) adjustment for next utilization.

A-Front sheet
B-Spring locking-pin
C-Strap
D-Chain
E-Anchor

CC,570RB002975 -19-15SEP98-1/1