Adjusting Twine Cutter Anvil

Move twine arm (A) by means of control monitor until it is centered over knife anvil (B).

Loosen nuts (C).

Adjust twine cutter assembly (D) so clearance (E) between knife anvil (B) and twine arm (A) is 1 to 4 mm (0.04 to 0.16 in.).

Retighten nuts (C).

Move twine arm to "home" position.

A-Twine arm
B-Knife anvil
C-Nuts
D-Cutter assembly
E-1 to 4 mm (0.04 to 0.16 in.)

CC,570RB003007 -19-15SEP98-1/1