Install BaleMaster or Electronic Wrapping Control Monitor Support (6000, 7000 and 8000 Series Tractors Only)

Remove the top two plugs from the lower right-hand cab post.

Install angle (A) to cab post. Fasten with two M10x20 flange screws.

Install monitor strap (B) to angle (A). Fasten with M10x35 cap screw (C), washer and flange nut (D).

Install monitor support (E) to monitor strap (B). Fasten with knob (F) and round-head bolt (G).

A-Angle
B-Monitor strap
C-Cap screw
D-Flange nut
E-Monitor support
F-Knob
G-Round-head bolt

CC,570RB003437 -19-15SEP98-1/1