Using Net Wrapping After Extended Storage

CAUTION: Avoid injury from entanglement in moving rolls. Disengage PTO and shut off tractor before servicing.

To minimize start-up problems after storage or after extended twine operation:

Remove excessive dust or crop material from feed rolls (A) and stainless steel net roll supports (B) with a dry cloth.

Remove rust from net roll brake (C), using SCOTCH-BRITE ® or ultra fine sandpaper.

Readjust feed roll pressure as described under "Adjusting Feed Roll Pressure" in Service Section.

SCOTCH-BRITE is a trademark of 3M Co.

CC,570RB003735 -19-15SEP98-1/1