Removing Net Wrapped Around Feed Rolls

CAUTION: Avoid injury from entanglement in moving rolls. Disengage PTO and shut off tractor before servicing.

If net wraps around the rubber roll:

Open net wrapping cover.

Release feed roll brake.

IMPORTANT: Do not cut net wrap material from rubber roll. Any knife cuts in the rubber roll covering may result in more frequent wrapping around the rolls and may require roll replacement.

Pull net wrap material away from the supply roll. Cut net material.

Gather the free end of the net wrap and lay over the top roll of wrap material.

Remove and discard all of the wrapped material, including all strings, staples, etc.

Wipe off feed rolls and check for any sticky material. If necessary, roll may be washed with soap and water. NEVER use solvents to clean rubber feed roll. Allow roll to dry before threading or wrappage may occur again.

CC,570RB003757 -19-01SEP98-1/1