BaleMaster Control Monitor Setup Values and Initial Settings

Bale Diameter:
Readout display range... 0.40 to 1.30 m (1 ft 3.7 in to 4 ft 3 in)-570 RB
0.40 to 1.55 m (1 ft 3.7 in to 5 ft 1 in)-580 RB
0.40 to 1.80 m (1 ft 3.7 in to 6 ft)-590 RB
Bale size initial setting... 1.2 m (3 ft 11 in)
Bale size adjustment range... 0.80 to 1.30 m (2 ft 7.5 in to 4 ft 3 in)-570 RB
0.80 to 1.55 m (2 ft 7.5 in to 5 ft 1 in)-580 RB
0.80 to 1.80 m (2 ft 7.5 in to 6 ft)-590 RB
   
Twine Wrap:
Twine spacing initial setting... 0.10 m (4 in.)
Twine spacing range with two twines... 0.02 to 0.15 m (0.78 to 5.90 in.)
Twine spacing range with one twine... 0.02 to 0.30 m (0.78 to 11.81 in.)
Number of side wraps initial setting... 2
Number of side wraps range... 0.1 to 10
Bale start/end position initial setting... 0.15 m (5.9 in.)
Bale start wrap position range... 0.08 to 0.25 m (3.14 to 9.85 in.)
Bale start wrap position range (flax mode)... 0.08 to 0.55 m (3.14 to 21.65 in.)
Bale end wrap position range... 0 to 0.35 m (0 to 13.77 in.)
Re-extension initial setting... NO re-extension
Re-extension range... -2 to 0.50 m (-2 to 19.68 in.)a
   
Net Wrap:
Net density initial setting... 2
Net density range... 1.5 to 5
   
Soft Core:
Soft core diameter initial setting... 0.6 m (1 ft 11.6 in)
Soft core mode initial setting... OFF
   
Miscellaneous Initial Settings:
Measurements... Metric
Counters... 0 in all 7 counters
Precutter operating mode... Pickup
aThe value -2 corresponds to a maximal reduction of 2 turns from the value set for the number of side wraps (l.h. side).

 

NOTE: Settings return to the initial values when BaleMaster control monitor is reset. Once a value has been modified, it is kept in memory when monitor is switched OFF or disconnected from the tractor electrical system.

CC,570RB003955 -19-02OCT97-1/1