Changing Measurement Units

The monitor is factory set to the metric measurement units.

Whenever necessary, the measurement units displayed on the LCD screen can be switched from the metric to the imperial units. Proceed as follows to switch from one to the other:

Switch ON monitor in twine or net mode.

Press and hold simultaneously DEERE and MINUS keys for 3 seconds to switch from the metric units to the imperial units (display is in inches).

Press and hold simultaneously DEERE and PLUS keys for 3 seconds to switch from the imperial units to the metric units (display is in meters).

Release keys to store the last measurement units entered.

CC,570RB003962 -19-15SEP98-1/1