OMCC50090: 570, 580 and 590 Round Balers( 322400- ), Block File: OUCC006_000020D_19

Position scraper (A) as close as possible to auger (B) without contact.

Adjust this clearance by means of adjusting screws (C).

Tighten screws (C).

Repeat this process on the opposite auger.

A-Scraper
B-Auger
C-Screws

1.81 m (5 ft 11 in) pickup

CC016187

2.20 m (7 ft 3 in) pickup

OUCC006,000020D -19-04SEP00-1/1